|
TECHNICAL DETAILS |
|
|
Appearance: |
Clear gel |
|
Viscosity: |
10000 mPa.s |
|
Grab Time: |
2-30 sec (depending on substrate and conditions) |
|
Maximum Bond strength after: |
12 hours |
|
Application Temperature: |
-55°C to +75°C |
|
Shear strength after 24 hours: |
Steel 1.9 MPa Perspex 2.6 MPa Hoop Pine 6.3 MPa Rubber 0.3 MPa |
HOW TO USE
Quick Fix Strong and Repositionable works best when the surfaces to be bonded are close fitting, but a small amount of gap filling is possible. Surfaces to be bonded should be clean, dry and free of dust.
Pierce seal at end of tube by attaching nozzle and cap and turning clockwise.
Remove cap and apply a small amount of glue to one surface. Bring surfaces together and apply slight pressure.
The product grabs within 2-30 seconds, depending on environmental conditions and substrates to be bonded.
Allow 30 minutes for sufficient bond strength for practical use.
HANDY HINTS
Cyanoacrylate adhesives can create a white residue on the surface of a substrate if the area is not well ventilated. Clean the affected area with acetone to remove residue.
CLEAN UP
After use, wipe excess product from nozzle with a tissue dipped in acetone (found in some nail polish removers) and replace cap.
LIMITATIONS
- Not suitable for permanent water immersion. ▪ Not suitable for bonding plastics such as Polypropylene, Polyethylene.
- Leather may harden or discolour with use ▪ For interior use only.
- Not suitable for repairing items that are in direct contact with hot liquids
Will not permanently bond glass
